PV2R Series Pump Cartridge
Product Introduction
PV2R series of vane pumps with high pressure and lower noise are high-performance products, which are developed and domestically produced by our company, featured by advanced performance, reasonable structure, good creditability, lower noise, ultra-low pulse and stable quality and so on. Precisely made, the product can be used in the equipment with high precision and low noise, and is widely used in cutting, plastic, leather, forging and engineering machinery fields, and the like.
Direction of port
Specifications
| Model | Displacement (mL/r) |
Max.pressure(MPa) | Speed(r/min) | Input power (kW) |
|||
| Special oil | Antiwear oil | Common oil | Min. | Max. | |||
| PV2R1-4 | 4.3 | 21 | 171.5 | 16 | 750 | 1800 | 2.1 |
| PV2R1-6 | 6.5 | 3.2 | |||||
| PV2R1-8 | 8.5 | 4.5 | |||||
| PV2R1-10 | 10.8 | 5.4 | |||||
| PV2R1-12 | 12.8 | 6.1 | |||||
| PV2R1-14 | 14.5 | 6.9 | |||||
| PV2R1-17 | 16.2 | 7.9 | |||||
| PV2R1-19 | 20.1 | 9.6 | |||||
| PV2R1-23 | 22.5 | 10.5 | |||||
| PV2R1-25 | 25.3 | 12.5 | |||||
| PV2R1-28 | 29.6 | 14 | |||||
| PV2R1-31 | 32.3 | 16 | 16 | 15.5 | |||
| PV2R2-26 | 25.3 | 21 | 17.5 | 14 | 600 | 1800 | 11.7 |
| PV2R2-33 | 32.3 | 15.5 | |||||
| PV2R2-41 | 39.8 | 18.9 | |||||
| PV2R2-47 | 49.8 | 23.2 | |||||
| PV2R2-53 | 51.5 | 24 | |||||
| PV2R2-59 | 55.8 | 24.9 | |||||
| PV2R2-65 | 63.7 | 29.4 | |||||
| PV2R2-70 | 70.3 | 16 | 1200 | 31.6 | |||
| PV2R2-79 | 78.1 | 35.7 | |||||
| PV2R2-85 | 82.7 | 37.5 | |||||
| PV2R3-52 | 51.5 | 21 | 17.5 | 14 | 600 | 1800 | 23.2 |
| PV2R3-60 | 63.7 | 29.4 | |||||
| PV2R3-66 | 66.6 | 34.2 | |||||
| PV2R3-76 | 75.5 | 37.7 | |||||
| PV2R3-94 | 89.5 | 41.2 | |||||
| PV2R3-116 | 118 | 16 | 16 | 50 | |||
| PV2R3-125 | 122.2 | 1200 | 59.9 | ||||
| PV2R3-136 | 136 | 66.7 | |||||
Note:
1. When pressure of pumps exceeds 16MPa, with displacement of “4″”6″”8″, speeds should be more than 1450r/min.
2. Reduce the negative pressure of the inlet when the single pumps or double pumps with large displacement at high speed.
3. In use of synthetic hydraulic fluids and water containing hydraulic fluids, limit the max speed at 1200r/min.
4. Speed at 1000r/min is suggested on occasions with lower noise strictly required.
5. Noisiness is available in working conditions of 14MPa and 1200r/min.
6. Input power is available in working conditions of 16MPa and 1500r/min.
Double Pumps
| Series | Displacement of shaft end pump | Displacement of cover end pump |
| PV2R21 | 26、33、41、47、53、59、65 | 4、6、8、10、12、14、17、19、23、25、28、31 |
| PV2R31 | 52、60、66、76、94、116、125、136 | 4、6、8、10、12、14、17、19、23、25、28、31 |
| PV2R32 | 52、60、66、76、94、116、125、136 | 26、33、41、47、53、59、65 |
Installation Dimensions
Single Pumps
Double Pumps
Shaft type
Straight Key shaft
| Model | Shaft code | A | B | C | ΦD | E | F key width xlength |
| 20V、20VQ、SQP1 | 1 | 59 | 9.53 | 12.1 | 22.23/22.20 | 24.5/24.4 | 4.76*32 |
| 25V、2520V 25VQ、2520VQ SQP2、SQP21 |
1 | 59 | 9.53 | 11.1 | 22.23/22.20 | 24.5/24.4 | 4.76*32 |
| 86 | 78 | 9.53 | 11.1 | 25.37/25.35 | 28.3/28.1 | 6.36*50.8 | |
| 35V、35V 35VQ、35VQ SQP3、SQP3 |
1 | 73.2 | 9.53 | 11.1 | 31.75/31.70 | 35.36/35.1 | 7.94*38.1 |
| 86 | 86 | 9.53 | 11.1 | 34.90/34.87 | 038.6/38.3 | 7.94*54 | |
| 45V、45V 45VQ、45VQ SQP4、SQP4 |
1 | 62 | 12.7 | 14.22 | 31.75/31.70 | 35.36/35.10 | 7.94*28.5 |
| 86 | 87.4 | 12.7 | 14.22 | 38.07/38.05 | 42.4/42.1 | 9.54*50.8 |
Spline shaft
| Model | Shaft code | A | B | C | D | E | Spline data(see below) |
| 20V、20VQ、 | 151 | 41.1 | 9.53 | 11.1 | 3.9 | 27.8 | A |
| 25V、2520V 25VQ、2520VQ |
11 | 44.5 | 9.53 | 11.1 | 3.9 | 27.8 | A |
| 35V、35V 35VQ、35VQ |
11 | 58.7 | 9.53 | 11.1 | 6.35 | 35.1 | C |
| 45V、45*V 45VQ、45*VQ |
11 | 61.9 | 12.7 | 14.3 | 9.7 | 39.6 | C |
Spline Data Table(Involute spline)
| Spline Data Reference | Number of teeth | Pitch | Major Diameter | Form Diameter | Minor Diameter | Minor Diameter |
| A | 13 | 16/32 | 22.17/22.15 | 19.03 | 18.63/18.35 | Major diameter fit |
| C | 14 | 12/24 | 31.70/31.67 | 27.2 | 26.99/26.64 |
Port flange kits
| Flange model |
Corresponding pipe specifications |
Dimensions mm | GB3452.1-2005 | PV2RSeries | |||||||||||
| C | D | E | F | H | J | L | N | Q | T | socket head screw |
Dimensions | Corresponding oil pump interface |
|||
| F04-A | 1/2″ | 40 | 54 | 17.5 | 38.1 | 9 | 27 | Rc1/2″ | 一 | 一 | 13 | 21.2×2.65 | M8×30mm | 12.5 | outlet，PV2R21，PV2R31outlet of cover end pump |
| F04-B | 一 | 11 | 22.5 | ||||||||||||
| F06-A | 3/4″ | 50.5 | 65.5 | 22.2 | 47.6 | 11 | 28 | Rc3/4″ | 一 | 一 | 19 | 30×3.55 | M10×30mm | 12.5 | PVR2outlet，PV2R21outlet of shaft end pump PV2R32 outlet of cover end pump |
| F06-B | 一 | 12 | 28.5 | ||||||||||||
| F08-A | 1″ | 56 | 71 | 26.2 | 52.4 | 11 | 30 | Rc1″ | 一 | 一 | 26 | 34.5×3.55 | M10×35mm | 17 | PVR1inlet port |
| F08-B | 一 | 14 | 34.5 | ||||||||||||
| F10-A | 1-1/4″ | 64.5 | 79.5 | 30.2 | 58.7 | 12 | 32 | Rc1-1/4 | 一 | 一 | 32 | 40×3.55 | M10×40mm | 19 | PVR2inlet port，PV2R3 outlet，PV2R31，PV2R32outlet of shaft end pump |
| F10-B | 一 | 16 | 43 | ||||||||||||
| F12-A | 1-1/2″ | 71 | 94 | 35.7 | 69.9 | 13.8 | 37 | Rc1-1/2″ | 一 | 一 | 38 | 50×3.55 | - | - | - |
| F12-B | 一 | 18 | 49.1 | ||||||||||||
| F16-A | 2″ | 87.5 | 103 | 42.9 | 77.8 | 13.8 | 38 | Rc2″ | 一 | 一 | 51 | 65×3.55 | M12×45mm | 17.5 | PVR3、PV2R21inlet |
| F16-B | 一 | 20 | 61 | ||||||||||||
| F20-A | 2-1/2″ | 96 | 115 | 50.8 | 88.9 | 13.8 | 42 | Rc2-1/2″ | 一 | 一 | 63 | 75×3.55 | -O84 | - | - |
| F20-B | 一 | 22 | 77.1 | ||||||||||||
| F24-A | 3″ | 123 | 136 | 61.9 | 106.4 | 17 | 45 | Rc3″ | 一 | 一 | 76 | 85×3.55 | M16×45mm | 16.5 | PVR31、PV2R32inlet |
| F24-B | 一 | 25 | 90 | ||||||||||||
| F28-A | 3-1/2″ | 135 | 153 | 69.9 | 120.7 | 17.5 | 46 | RC3-1/2 | 一 | 一 | 89 | 100×3.55 | - | - | |
| F28-B | 一 | 20 | 102.8 | ||||||||||||
| F32-A | 4″ | 145 | 162 | 77.8 | 130.2 | 17 | 50 | Rc4″ | 一 | 一 | 102 | 115×3.55 | - | - | |
| F32-B | 40 | 一 | 28 | 115.5 | |||||||||||
