Matters needing attention in application of hydraulic pump:
1) Check the touch ports of the hydraulic clamp body and the top cover before application. If there are cracks in the hydraulic clamp body, stop application.
2) After the hydraulic press is started, it shall run with no load first, check the running state of each part, and it shall not be applied until it is abnormal; When the piston of the crimping tool is lifted, the human body shall not be located above the crimping tool.
3) When placing the top cover, it is necessary to make the top cover completely conform to the clamp body to prevent crimping without twisting in place.
4) The hydraulic pump operator shall closely cooperate with the operator of the crimping pliers and instigate the stabilizing pressure without overload.
5) The safety relief valve of the hydraulic pump shall not be adjusted casually, but the relief valve shall not be used for unloading.
Taizhou Hongyi Hydraulic Servo Technology Co., Ltd. is the leading manufacturer of high performance vane pumps in China.
If you have any questions, please contact us: https://www.vanepumpfactory.com/
Post time: Dec-30-2021