News

  • What Are The Classification of Injection Machine?

    Since there are many structures and types of injection products, there are many types of injection machines used to form injection products. Injection molding machines are classified in the following ways: 1. According to the plasticizing and injection methods of raw materials, the injection mol...
    Read more
  • Which Three Basic Conditions Must Hydraulic Pump Work Normally?

    All kinds of hydraulic pumps have different components for pumping, but the pumping principle is the same. The volume of all pumps increases on the oil suction side and decreases on the oil pressure side. Through the above analysis, it can be concluded that the working principle of the hydraulic...
    Read more
  • Installation and Commissioning of Vickers Hydraulic Pumps

    What should we pay attention to during the installation and commissioning of Vickers hydraulic pumps? 1. Pay attention to the operating conditions within three months of the new machine running 2. Do not add to the load immediately after the hydraulic pump starts 3. Observe the oil temperature c...
    Read more
  • Vickers Vane Pump Solution for Oil Leakage

    How to solve the problem of oil leakage caused by unreasonable design of Vickers vane pump piping pattern? What are the solution methods in the solution process? When the Vickers vane pump piping layout design is not reasonable, the oil leakage directly affects the oil leakage at the pipe joint....
    Read more
  • Make Clear The Correct Use Method of Vane Pump

    There are several situations in which the vane pump sounds loud and the pressure drops: 1. When the vane pump was installed for the first time, the customer adjusted the outlet direction by himself. The positioning pin in the pump core was not inserted into the positioning hole, and the oil suct...
    Read more
  • Failure Analysis of Vickers Vane Pump

    How can we solve the problem of oil leakage caused by improper design of Vickers vane pump piping? What are the solutions in the process of solution? When the Vickers vane pump pipeline layout design is unreasonable, the oil leakage will directly affect the oil leakage at the pipe joint. Statist...
    Read more
  • Briefly Introduce the Working Principle of Hydraulic Pump

    The hydraulic pump is the power component of the hydraulic system. It is driven by the engine or electric motor. It sucks the oil from the hydraulic oil tank, forms a pressure oil and sends it to the actuator. The hydraulic pump is divided into gear pump, plunger pump, vane pump and screw pump a...
    Read more
  • What is The Working Principle of Servo Pumps With Different Structures?

    Servo vane pump is an important hydraulic device in hydraulic system. Through reciprocating motion in servo pump cylinder, the volume of sealed working chamber changes to realize oil absorption and pressure. Then what are the structural types of servo pumps and how do they work? Hongyi Hydraulic...
    Read more
  • VQ Series High Pressure Quantitative Vane Pump

    Today Taizhou Hongyi Hydraulic will give you a brief introduction of VQ pump. Scope of application: High pressure and high performance vane pump for construction machinery. Features: 1. The pressure is higher by adopting a hydraulically balanced structure of mother and son blades and a design of...
    Read more
  • Main Measures for Use And Maintenance of Servo Vane Pump

    Today we will talk about the main measures for the use and maintenance of servo vane pump. 1. Plunger pump has large flow rate, high pressure, high rotating speed and poor operating environment, especially large temperature difference. Hydraulic oil must be strictly selected according to the req...
    Read more
  • Three Types of Hydraulic Pumps and Their Characteristics are Introduced

    Hydraulic vane pumps are divided into gear pump, vane pump and plunger pump. 1.Gear Pump Advantages: smaller volume, simpler structure, lax requirement on cleanliness of oil and lower price. Disadvantages: The pump shaft suffers from unbalanced force, serious wear and large leakage. 2.Vane Pump ...
    Read more
  • High Pressure And High Performance Locating Pin Vane Pump

    Servo vane pump gloally first created, High pressure and high performance dowel pin type vane pumps are widely used for plastic machinery, casting machinery. With dowel pin vane structure, it can work in high pressure, low noise and long lifetime. Now let’s introduce some points for attent...
    Read more